陶瓷纤维带防火带排气管防烫布

简介
北京费普福工程技术有限公司陶瓷纤维带以高强陶瓷纤维为原料，经纺纱、织造而成。根据不同的使用温度，不同使用条件，加入玻璃纤维或者耐热合金丝等增强材料，使其连续使用温度达1050°C。短时间使用温度也可达1260°C。具有良好的抗酸碱腐蚀性与抗铝、锌等熔融金属侵蚀能力。

参数表
项目 数值
颜色 白
最高使用温度 1260°C
纤维直径 3~5μm
热收缩率（1232°C，24h） 3.5%
热传导率（538°C，8pcf） 0.130w/mk
Al2O3 45~48%
Fe2O3 0.7~1.2%
CaO&NaCl 0.43%
渣球含量 < 8.5%
击穿电压 5kv/mm
体电阻 5x10 10Ω
含水率 < 2%
有机纤维含量 < 20%

规格表
项目 工作温度
(°C) 带宽
(mm) 厚度
(mm)
玻纤增强 650 30,40,50,60,70,75,80,
100,120,150 2,3,5
金属丝增强 1050
烧结带（不燃） 1050




应用范围
 各种窑炉、高温管道及容器的隔热保温；
 炉门、阀门、法兰密封；
 防火门及防火卷帘材料；
 高温炉门帘；
 发动机及仪表隔热；
 防火电缆包覆材料，高温防火材料；
 隔热覆盖用布料；
 烟道内衬；
 高温过滤、吸音及其他代替石棉应用领域；
 l 摩托车汽车芭蕉隔热带；

Introduction
Fiber Tape is produced by high quality refractory ceramic fiber and woven from yarn. It can be used for high temperature applications up to1050°C. The cloth is reinforced with fiberglass filament, and optional SUS304 wire (Inconel/alloy steel wire). Or even short working temperature could be reached to 1260°C. It has good resistance to acid corrosion, resistant aluminum, zinc and other molten metal erosion.

Parameter table
Type Data
Color White
Max working temp 1260°C
Fiber diameter 3~5μm
Heat shrinkage（1232°C，24h） 3.5%
Thermal conductivity（538°C，8pcf） 0.130w/mk
Al2O3 45~48%
Fe2O3 0.7~1.2%
CaO&NaCl 0.43%
Shot < 8.5%
Breakdown voltage 5kv/mm
Resistance 5x10 10Ω
Moisture content < 2%
Organic fiber content < 20%
Continuous working temp: 1050°C (1900°F);
Maximum working temp: 1260°C (2300°F);

Ceramic fiber tape(Metric system)
Articles Working Temperature
(°C) Width
(mm) Thickness
(mm)
Reinforced by E-glass filament 650 30,40,50,60,70,75,80,
100,120,150 2,3,5
Reinforced by stainless steel wire 1050
Sintered Tape(not burning) 1050

Articles Working Temperature
(°F) Width
(in) Thickness
(mm)
Reinforced by E-glass filament 1200 1/2", 1", 1-1/2",
2", 3", 4", 6" 1/16"
1/8"
Reinforced by Inconel/alloy steel wire 1900
Sintered Tape(not burning) 1900
Note:
1. All the listed are plain weave with selvage.
2. Roll length is 30m(100ft) or 50m(164ft).
3. The other special specifications, please contact us.

Application
 High temperature insulation of kilns, pipes and vessels;
 Sealing of doors, valves, flanges;
 Raw material of fire doors and fire shutters;
 High temperature furnace curtain;
 Insulation of engine and instrument;
 Fireproof cable coverings and high temperature fireproof materials;
 Covering insulation cloth;
 Flue liner and other high temperature filtration;
 Sound-absorbing and other used to replace asbestos applications;